Turkey hs code chapter 72

Turkey hs code chapter 72

I.PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM

72.01 Pig iron and spiegeleisen in pigs, blocks or other primary forms:

7201.10 - Non-alloy pig iron containing by weight 0,5 % or less of phosphorus:
- - Containing by weight not less than 0,4 % of manganese:
7201.10.11.00.00 - - - Containing by weight 1 % or less of silicon
7201.10.19.00.00 - - - Containing by weight more than 1 % of silicon
7201.10.30.00.00 - - Containing by weight not less than 0,1 % but less than 0,4 % of manganese
7201.10.90.00.00 - - Containing by weight less than 0,1 % of manganese
7201.20 - Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
7201.20.00.00.11 - - Containing by weight 1 % or less of silicon
7201.20.00.00.12 - - Containing by weight more than 1 % of silicon
7201.50 - Alloy pig iron; spiegeleisen:
7201.50.10.00.00 - - Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
7201.50.90.00.00 - - Other
72.02 Ferro-alloys:
- Ferro-manganese:
7202.11 - - Containing by weight more than 2 % of carbon:
7202.11.20.00.00 - - - With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %
7202.11.80.00.00 - - - Other
7202.19 - - Other:
7202.19.00.00.11 - - - With a granulometry not exceeding 0,4 mm and a manganese content by weight exceeding 78 %
7202.19.00.00.19 - - - Other
- Ferro-silicon:
7202.21 - - Containing by weight more than 55 % of silicon
7202.21.00.00.11 - - - Containing by weight more than 55 % but not more than 80 % of silicon
7202.21.00.00.12 - - - Containing by weight more than 80 % of silicon
7202.29 - - Other:
7202.29.10.00.00 - - - Containing by weight 4 % or more but not more than 10 % of magnesium
7202.29.90.00.00 - - - Other
7202.30.00.00.00 - Ferro-silico-manganese
- Ferro-chromium:
7202.41 - - Containing by weight more than 4 % of carbon:
7202.41.10.00.00 - - - Containing by weight more than 4 % but not more than 6 % of carbon
- - - Containing by weight more than 6 % of carbon
7202.41.90.00.11 - - - - Containing by weight not more than 60 % of chromium
7202.41.90.00.12 - - - - Containing by weight not more than 60 % of chromium
7202.49 - - Other:
7202.49.10.00.00 - - - Containing by weight not more than 0,05 % of carbon
7202.49.50.00.00 - - - Containing by weight more than 0,05 % but not more than 0,5 % of carbon
7202.49.90.00.00 - - - Containing by weight more than 0,5 % but not more than 4 % of carbon
7202.50.00.00.00 - Ferro-silico-chromium
7202.60.00.00.00 - Ferro-nickel
7202.70.00.00.00 - Ferro-molybdenum
7202.80.00.00.00 - Ferro-tungsten and ferro-silico-tungsten
- Other:
7202.91.00.00.00 - - Ferro-titanium and ferro-silico-titanium
7202.92.00.00.00 - - Ferro-vanadium
7202.93.00.00.00 - - Ferro-niobium
7202.99 - - Other:
- - - Ferro-phosphorus
7202.99.10.10.00 - - - - Containing by weight 15 % or more of phosphorous
7202.99.10.90.00 - - - - Other
7202.99.30.00.00 - - - Ferro-silico-magnesium
7202.99.80.00.00 - - - Other
72.03 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms:
7203.10.00.00.00 - Ferrous products obtained by direct reduction of iron ore
7203.90.00.00.00 - Other
72.04 Ferrous waste and scrap; remelting scrap ingots of iron or steel:
7204.10 - Waste and scrap of cast iron
7204.10.00.00.11 - - Sorted or graded
7204.10.00.00.19 - - Other
- Waste and scrap of alloy steel:
7204.21 - - Of stainless steel:
- - - Containing by weight 8 % or more of nickel
7204.21.10.00.11 - - - - Sorted or graded
7204.21.10.00.19 - - - - Other
- - - Other
7204.21.90.00.11 - - - - Sorted or graded
7204.21.90.00.19 - - - - Other
7204.29 - - Other
7204.29.00.00.11 - - - Sorted or graded
7204.29.00.00.19 - - - Other
7204.30.00.00.00 - Waste and scrap of tinned iron or steel
- Other waste and scrap:
7204.41 - - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles:
7204.41.10.00.00 - - - Turnings, shavings, chips, milling waste, sawdust and filings
- - - Trimmings and stampings:
7204.41.91.00.00 - - - - In bundles
7204.41.99.00.00 - - - - Other
7204.49 - - Other:
7204.49.10.00.00 - - - Fragmentised (shredded)
- - - Other:
7204.49.30.00.00 - - - - In bundles
- - - - Other:
7204.49.90.00.11 - - - - - Neither sorted nor graded:
7204.49.90.00.19 - - - - - Other
7204.50 - Remelting scrap ingots
7204.50.00.10.00 - - Of alloy steel
7204.50.00.90.00 - - Other
72.05 Granules and powders, of pig iron, spiegeleisen, iron or steel:
7205.10 - Granules
7205.10.00.00.11 - - Granules of pig iron
7205.10.00.00.12 - - Granules of spiegeleisen
7205.10.00.00.13 - - Granules of iron or steel
- Powders:
7205.21.00.00.00 - - Of alloy steel
7205.29 - - Other
7205.29.00.00.11 - - - Powders of pig iron
7205.29.00.00.12 - - - Powders of spiegeleisen
7205.29.00.00.13 - - - Powders of iron or steel

II. IRON AND NON - ALLOY STEEL

72.06 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203):

7206.10 - Ingots

7206.10.00.10.00 - - Containing by weight 0,6 % or more of carbon
7206.10.00.90.00 - - Other
7206.90 - Other
7206.90.00.00.11 - - Bars and rots of puddle iron
7206.90.00.00.12 - - Iron and non-alloy steel in ingots or other primary forms
72.07 Semi-finished products of iron or non-alloy steel:
- Containing by weight less than 0,25 % of carbon:
7207.11 - - Of rectangular (including square) cross-section, the width measuring less than twice the thickness:
- - - Rolled or obtained by continuous casting
7207.11.11.00.00 - - - - Other, of free-cutting steel
- - - - Other:
7207.11.14.00.00 - - - - - Of a thickness not exceeding 130 mm
7207.11.16.00.00 - - - - - Of a thickness exceeding 130 mm
7207.11.90.00.00 - - - Forged
7207.12 - - Other, of rectangular (other than square) cross-section:
- - - Rolled or obtained by continuous casting
7207.12.10.00.11 - - - - Rolled sheet of rectangular cross-section
7207.12.10.00.12 - - - - Sheet of rectangular cross-section obtained by continuous casting
7207.12.10.00.13 - - - - Rolled plate platinate of rectangular cross-section
7207.12.10.00.14 - - - - Plate platinate of rectangular cross-section obtained by continuous casting
- - - Forged
7207.12.90.00.11 - - - - Forged sheet of rectangular cross-section
7207.12.90.00.12 - - - - Forged plate platinate of rectangular cross-section
7207.19 - - Other:
- - - Of circular or polygonal cross-section:
- - - - Rolled or obtained by continuous casting
7207.19.12.00.10 - - - - - Of free-cutting steel
- - - - - Other:
7207.19.12.00.21 - - - - - - Obtained by continuous casting:
7207.19.12.00.29 - - - - - - Other
7207.19.19.00.00 - - - - Forged
- - - Other
- - - - Blanks for angles, shapes and sections:
7207.19.80.00.11 - - - - - Rolled or obtained by continuous casting
7207.19.80.00.12 - - - - - Forged
7207.19.80.00.90 - - - - Other
7207.20 - Containing by weight 0,25 % or more of carbon:
- - Of rectangular (including square) cross-section, the width measuring less than twice the thickness:
- - - Rolled or obtained by continuous casting
- - - - Of free-cutting steel
7207.20.11.00.11 - - - - - Rolled blooms
7207.20.11.00.12 - - - - - Blums, obtained by continuous casting
7207.20.11.00.13 - - - - - Rolled ingots
7207.20.11.00.14 - - - - - Ingots obtained by continuous casting
- - - - Other:
- - - - - 0,25 % or more but less than 0,6 % of carbon
7207.20.15.00.11 - - - - - - Rolled blooms
7207.20.15.00.12 - - - - - - Blooms obtained by continuous casting
7207.20.15.00.13 - - - - - - Rolled ingots
7207.20.15.00.14 - - - - - - Ingots obtained by continuous casting
- - - - - Containing by weight 0,6 % or more of carbon
7207.20.17.00.11 - - - - - - Rolled blooms
7207.20.17.00.12 - - - - - - Blooms obtained by continuous casting
7207.20.17.00.13 - - - - - - Rolled ingots
7207.20.17.00.14 - - - - - - Ingots obtained by continuous casting
- - - Forged
7207.20.19.00.11 - - - - Blooms
7207.20.19.00.12 - - - - Ingots
- - Other, of rectangular (other than square) cross-section:
- - - Rolled or obtained by continuous casting
7207.20.32.00.11 - - - - Rolled sheet of rectangular cross-section
7207.20.32.00.12 - - - - Sheet of rectangular cross-section obtained by continuous casting
7207.20.32.00.13 - - - - Rolled plate platinate of rectangular cross-section
7207.20.32.00.14 - - - - Plate platinate of rectangular cross-section obtained by continuous casting
- - - Forged
7207.20.39.00.11 - - - - Forged sheet of rectangular cross-section
7207.20.39.00.12 - - - - Forged plate platinate of rectangular cross-section
- - Of circular or polygonal cross-section:
- - - Rolled or obtained by continuous casting
7207.20.52.00.10 - - - - Of free-cutting steel
- - - - Other:
7207.20.52.00.21 - - - - - Containing by weight 0.25 or more but less than 0.6% of carbon
7207.20.52.00.29 - - - - - Containing by weight 0,6 % or more of carbon
7207.20.59.00.00 - - - Forged
- - Other:
- - - Containing by weight 0,6 % or more of carbon
- - - - Blanks for angles, shapes and sections:
7207.20.80.10.11 - - - - - Rolled or obtained by continuous casting
7207.20.80.10.19 - - - - - Forged
7207.20.80.10.90 - - - - Other
- - - Other
- - - - Blanks for angles, shapes and sections:
7207.20.80.90.11 - - - - - Rolled or obtained by continuous casting
7207.20.80.90.19 - - - - - Forged
7207.20.80.90.90 - - - - Other
72.08 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hotrolled, not clad, plated or coated:
7208.10 - In coils, not further worked than hot-rolled, with patterns in relief
7208.10.00.10.00 - - Containing by weight 0,6 % or more of carbon
7208.10.00.90.00 - - Other
- Other, in coils, not further worked than hot-rolled, pickled:
7208.25 - - Of a thickness of 4,75 mm or more
7208.25.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7208.25.00.90.00 - - - Other
7208.26 - - Of a thickness of 3 mm or more but less than 4,75 mm
7208.26.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7208.26.00.90.00 - - - Other
7208.27 - - Of a thickness of less than 3 mm
7208.27.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7208.27.00.90.00 - - - Other
- Other, in coils, not further worked than hot-rolled:
7208.36 - - Of a thickness exceeding 10 mm
7208.36.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7208.36.00.90.00 - - - Other
7208.37 - - Of a thickness of 4,75 mm or more but not exceeding 10 mm
- - - With parallel flange faces
7208.37.00.10.11 - - - - Intended for re-rolling
7208.37.00.10.19 - - - - Other
- - - Other:
7208.37.00.90.11 - - - - Intended for re-rolling
7208.37.00.90.19 - - - - Other
7208.38 - - Of a thickness of 3 mm or more but less than 4,75 mm
- - - With parallel flange faces
7208.38.00.10.11 - - - - Intended for re-rolling
7208.38.00.10.19 - - - - Other
- - - Other:
7208.38.00.90.11 - - - - Intended for re-rolling
7208.38.00.90.19 - - - - Other
7208.39 - - Of a thickness of less than 3 mm
- - - With parallel flange faces
7208.39.00.10.11 - - - - Intended for re-rolling
7208.39.00.10.19 - - - - Other
- - - Other:
7208.39.00.90.11 - - - - Intended for re-rolling
7208.39.00.90.19 - - - - Other
7208.40 - Not in coils, not further worked than hot-rolled, with patterns in relief
- - With parallel flange faces
7208.40.00.10.11 - - - Of a thickness of 2 mm or more
7208.40.00.10.19 - - - Other
- - Other:
7208.40.00.90.11 - - - Of a thickness of 2 mm or more
7208.40.00.90.19 - - - Other
- Other, not in coils, not further worked than hot-rolled:
7208.51 - - Of a thickness exceeding 10 mm:
- - - Of a thickness exceeding 15 mm
- - - - With parallel flange faces
7208.51.20.10.11 - - - - - Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
7208.51.20.10.19 - - - - - Other
- - - - Wide plates
7208.51.20.30.11 - - - - - Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
7208.51.20.30.19 - - - - - Other
- - - - Other
7208.51.20.90.11 - - - - - Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
7208.51.20.90.19 - - - - - Other
- - - Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of:
- - - - 2 050 mm or more
7208.51.91.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7208.51.91.90.00 - - - - - Other
- - - - Less than 2 050 mm:
7208.51.98.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7208.51.98.30.00 - - - - - Wide plates
7208.51.98.90.00 - - - - - Other
7208.52 - - Of a thickness of 4,75 mm or more but not exceeding 10 mm:
- - - Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
7208.52.10.10.00 - - - - Containing by weight 0,6 % or more of carbon
7208.52.10.90.00 - - - - Other
- - - Other
- - - - 2 050 mm or more
7208.52.91.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7208.52.91.90.00 - - - - - Other
- - - - Less than 2 050 mm
7208.52.99.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7208.52.99.90.00 - - - - - Other
7208.53 - - Of a thickness of 3 mm or more but less than 4,75 mm:
- - - Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more
7208.53.10.10.00 - - - - Containing by weight 0,6 % or more of carbon
7208.53.10.90.00 - - - - Other
- - - Other
7208.53.90.10.00 - - - - Containing by weight 0,6 % or more of carbon
7208.53.90.90.00 - - - - Other
7208.54 - - Of a thickness of less than 3 mm
- - - Containing by weight 0,6 % or more of carbon
7208.54.00.10.11 - - - - Of a thickness of 2 mm or more
7208.54.00.10.19 - - - - Other
- - - Other
7208.54.00.90.11 - - - - Of a thickness of 2 mm or more
7208.54.00.90.19 - - - - Other
7208.90 - Other:
- - Perforated
- - - Containing by weight 0,6 % or more of carbon
7208.90.20.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7208.90.20.10.12 - - - - Other
- - - Other:
7208.90.20.20.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7208.90.20.20.12 - - - - Other
- - Other:
- - - Containing by weight 0,6 % or more of carbon
7208.90.80.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7208.90.80.10.12 - - - - Other
- - - Other
7208.90.80.20.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7208.90.80.20.12 - - - - Other
72.09 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
- In coils, not further worked than cold-rolled (cold-reduced):
7209.15 - - Of a thickness of 3 mm or more
7209.15.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7209.15.00.90.00 - - - Other
7209.16 - - Of a thickness exceeding 1 mm but less than 3 mm:
- - - 'Electrical'
7209.16.10.00.11 - - - - Having 0,75 or less of watt loss
7209.16.10.00.19 - - - - Other
- - - Other:
7209.16.90.10.00 - - - - Containing by weight 0,6 % or more of carbon
7209.16.90.90.00 - - - - Other
7209.17 - - Of a thickness of 0,5 mm or more but not exceeding 1 mm:
- - - 'Electrical'
7209.17.10.00.11 - - - - Having 0,75 or less of watt loss
7209.17.10.00.19 - - - - Other
- - - Other:
7209.17.90.10.00 - - - - Containing by weight 0,6 % or more of carbon
7209.17.90.90.00 - - - - Other
7209.18 - - Of a thickness of less than 0,5 mm:
- - - 'Electrical'
7209.18.10.00.11 - - - - Having 0,75 or less of watt loss
7209.18.10.00.19 - - - - Other
- - - Other:
- - - - Of a thickness of 0,35 mm or more but less than 0,5 mm:
7209.18.91.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7209.18.91.90.00 - - - - - Other
- - - - Of a thickness of less than 0,35 mm:
7209.18.99.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7209.18.99.90.00 - - - - - Other
- Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25 - - Of a thickness of 3 mm or more
7209.25.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7209.25.00.90.00 - - - Other
7209.26 - - Of a thickness exceeding 1 mm but less than 3 mm:
- - - 'Electrical'
7209.26.10.00.11 - - - - Having 0,75 or less of watt loss
7209.26.10.00.19 - - - - Other
- - - Other:
7209.26.90.10.00 - - - - Containing by weight 0,6 % or more of carbon
7209.26.90.90.00 - - - - Other
7209.27 - - Of a thickness of 0,5 mm or more but not exceeding 1 mm:
- - - 'Electrical'
7209.27.10.00.11 - - - - Having 0,75 or less of watt loss
7209.27.10.00.19 - - - - Other
- - - Other:
7209.27.90.10.00 - - - - Containing by weight 0,6 % or more of carbon
7209.27.90.90.00 - - - - Other
7209.28 - - Of a thickness of less than 0,5 mm:
- - - 'Electrical'
7209.28.10.00.11 - - - - Having 0,75 or less of watt loss
7209.28.10.00.19 - - - - Other
- - - Other:
7209.28.90.10.00 - - - - Containing by weight 0,6 % or more of carbon
7209.28.90.90.00 - - - - Other
7209.90 - Other:
- - Perforated
7209.90.20.11.00 - - - Containing by weight 0,6 % or more of carbon
7209.90.20.19.00 - - - Other
- - Other:
7209.90.80.21.00 - - - Containing by weight 0,6 % or more of carbon
7209.90.80.29.00 - - - Other
72.10 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated:
- Plated or coated with tin:
7210.11 - - Of a thickness of 0,5 mm or more
- - - Containing by weight 0,6 % or more of carbon
7210.11.00.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.11.00.10.19 - - - - Other
- - - Other:
7210.11.00.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.11.00.90.19 - - - - Other
7210.12 - - Of a thickness of less than 0,5 mm:
- - - Tinplate
- - - - Electrolytic tinplates and coke tinplates
7210.12.20.00.11 - - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
- - - - - Other
7210.12.20.00.21 - - - - - - Containing by weight 0,6 % or more of carbon
7210.12.20.00.29 - - - - - - Other
- - - - Other
7210.12.20.00.80 - - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
- - - - - Other
7210.12.20.00.91 - - - - - - Containing by weight 0,6 % or more of carbon
7210.12.20.00.99 - - - - - - Other
- - - Other:
- - - - Containing by weight 0,6 % or more of carbon
7210.12.80.10.11 - - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.12.80.10.19 - - - - - Other
- - - - Other
7210.12.80.90.11 - - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.12.80.90.19 - - - - - Other
7210.20 - Plated or coated with lead, including terne-plate
- - Containing by weight 0,6 % or more of carbon
7210.20.00.10.11 - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.20.00.10.19 - - - Other
- - Other
7210.20.00.90.11 - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.20.00.90.19 - - - Other
7210.30 - Electrolytically plated or coated with zinc
- - Containing by weight 0,6 % or more of carbon
7210.30.00.10.11 - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.30.00.10.19 - - - Other
- - Other
7210.30.00.90.11 - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.30.00.90.19 - - - Other
- Otherwise plated or coated with zinc:
7210.41 - - Corrugated
- - - Containing by weight 0,6 % or more of carbon
7210.41.00.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.41.00.10.19 - - - - Other
- - - Other
7210.41.00.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.41.00.90.19 - - - - Other
7210.49 - - Other
- - - Containing by weight 0,6 % or more of carbon
7210.49.00.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.49.00.10.19 - - - - Other
- - - Other
7210.49.00.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.49.00.90.19 - - - - Other
7210.50 - Plated or coated with chromium oxides or with chromium and chromium oxides
- - Containing by weight 0,6 % or more of carbon
7210.50.00.10.11 - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.50.00.10.19 - - - Other
- - Other
7210.50.00.90.11 - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.50.00.90.19 - - - Other
- Plated or coated with aluminium:
7210.61 - - Plated or coated with aluminium-zinc alloys
- - - Containing by weight 0,6 % or more of carbon
7210.61.00.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.61.00.10.19 - - - - Other
- - - Other
7210.61.00.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.61.00.90.19 - - - - Other
7210.69 - - Other
- - - Containing by weight 0,6 % or more of carbon
7210.69.00.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.69.00.10.19 - - - - Other
- - - Other
7210.69.00.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.69.00.90.19 - - - - Other
7210.70 - Painted, varnished or coated with plastics:
- - Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7210.70.10.00.11 - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
- - - Other
7210.70.10.00.21 - - - - Containing by weight 0,6 % or more of carbon
7210.70.10.00.29 - - - - Other
- - Other:
- - - Containing by weight 0,6 % or more of carbon
7210.70.80.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.70.80.10.19 - - - - Other
- - - Other
7210.70.80.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.70.80.90.19 - - - - Other
7210.90 - Other:
- - Clad
- - - With parallel flange faces
7210.90.30.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.90.30.10.19 - - - - Other
- - - Other
7210.90.30.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.90.30.90.19 - - - - Other
- - Tinned and printed
- - - Containing by weight 0,6 % or more of carbon
7210.90.40.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.90.40.10.19 - - - - Other
- - - Other
7210.90.40.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.90.40.90.19 - - - - Other
- - Other:
- - - Containing by weight 0,6 % or more of carbon
7210.90.80.10.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.90.80.10.19 - - - - Other
- - - Other
7210.90.80.90.11 - - - - Not further worked than surface-treated or simply cut into shapes other than rectangular (including square):
7210.90.80.90.19 - - - - Other
72.11 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated:
- Not further worked than hot-rolled:
7211.13 - - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- - - Wide plates:
7211.13.00.11.00 - - - - Containing by weight 0,6 % or more of carbon
7211.13.00.19.00 - - - - Other
7211.13.00.20.00 - - - Flat rods (other than containing by weight 0,6 % or more of carbon
- - - Strips and Sheets:
- - - - Containing by weight 0,6 % or more of carbon
7211.13.00.31.11 - - - - - Strips
7211.13.00.31.12 - - - - - Sheets
- - - - Other
7211.13.00.39.11 - - - - - Strips
7211.13.00.39.12 - - - - - Sheets
7211.14 - - Other, of a thickness of 4,75 mm or more
7211.14.00.10.00 - - - Blanks for sheets, in rolls (other than containing by weight 0,6 % or more of carbon)
- - - Wide plates:
- - - - Containing by weight 0,6 % or more of carbon
7211.14.00.21.11 - - - - - Of a width exceeding 500 mm :
7211.14.00.21.12 - - - - - Of a width not exceeding 500 mm:
- - - - Other
7211.14.00.29.11 - - - - - Of a width exceeding 500 mm :
7211.14.00.29.12 - - - - - Of a width not exceeding 500 mm:
- - - Plates:
7211.14.00.31.00 - - - - Containing by weight 0,6 % or more of carbon
7211.14.00.39.00 - - - - Other
- - - Ribbons:
7211.14.00.41.00 - - - - Containing by weight 0,6 % or more of carbon
7211.14.00.49.00 - - - - Other
7211.14.00.50.00 - - - Flat rods (other than containing by weight 0,6 % or more of carbon)
7211.19 - - Other
7211.19.00.10.00 - - - Blanks for sheets, in rolls (other than containing by weight 0,6 % or more of carbon)
- - - Plates:
7211.19.00.21.00 - - - - Containing by weight 0,6 % or more of carbon
7211.19.00.29.00 - - - - Other
- - - Ribbons:
7211.19.00.31.00 - - - - Containing by weight 0,6 % or more of carbon
7211.19.00.39.00 - - - - Other
7211.19.00.50.00 - - - Flat rods (other than containing by weight 0,6 % or more of carbon)
- Not further worked than cold-rolled (cold-reduced):
7211.23 - - Containing by weight less than 0,25 % of carbon:
- - - 'Electrical'
7211.23.20.10.00 - - - - Strips
7211.23.20.20.00 - - - - Flat rods
- - - - Other:
7211.23.20.90.11 - - - - - Of a width exceeding 500 mm :
7211.23.20.90.12 - - - - - Of a width not exceeding 500 mm:
- - - Other:
- - - - Of a thickness of 0,35 mm or more
7211.23.30.00.11 - - - - - Of a width exceeding 500 mm :
- - - - - Of a width not exceeding 500 mm:
7211.23.30.00.21 - - - - - - Strips
7211.23.30.00.22 - - - - - - Flat rods
- - - - Of a thickness of less than 0,35 mm
7211.23.80.10.00 - - - - - Strips
7211.23.80.20.00 - - - - - Flat rods
- - - - - Other:
7211.23.80.90.11 - - - - - - Of a width exceeding 500 mm :
7211.23.80.90.12 - - - - - - Of a width not exceeding 500 mm:
7211.29 - - Other
- - - Strips
7211.29.00.10.11 - - - - Containing by weight 0,25 % or more but less than 0,6 % of carbon:
7211.29.00.10.12 - - - - Containing by weight 0,6 % or more of carbon
- - - Other
- - - - Of a width exceeding 500 mm:
7211.29.00.21.00 - - - - - Containing by weight 0,6% of carbon
7211.29.00.29.00 - - - - - Other
- - - - Of a width not exceeding 500 mm:
7211.29.00.31.00 - - - - - Containing by weight 0,25 % or more but less than 0,6 % of carbon:
7211.29.00.39.00 - - - - - Containing by weight 0,6 % or more of carbon
7211.90 - Other:
- - Perforated
- - - Of a width exceeding 500 mm:
7211.90.20.11.00 - - - - Containing by weight 0,6 % or more of carbon
7211.90.20.19.00 - - - - Other
- - - Other:
- - - - Containing by weight 0,6 % or more of carbon
7211.90.20.21.11 - - - - - Not further worked than surface-treated
7211.90.20.21.19 - - - - - Other
7211.90.20.22.00 - - - - Flat rods (other than containing by weight 0,6 % or more of carbon)
- - - - Other
7211.90.20.29.11 - - - - - Not further worked than surface-treated
7211.90.20.29.19 - - - - - Other
- - Other:
- - - Of a width exceeding 500 mm:
7211.90.80.11.00 - - - - Containing by weight 0,6 % or more of carbon
7211.90.80.19.00 - - - - Other
- - - Other:
- - - - Containing by weight 0,6 % or more of carbon
7211.90.80.21.11 - - - - - Not further worked than surface-treated
7211.90.80.21.19 - - - - - Other
7211.90.80.22.00 - - - - Flat rods (other than containing by weight 0,6 % or more of carbon)
- - - - Other
7211.90.80.29.11 - - - - - Not further worked than surface-treated
7211.90.80.29.19 - - - - - Other
72.12 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated:
7212.10 - Plated or coated with tin:
- - Tinplate, not further worked than surface-treated
7212.10.10.00.11 - - - Electrolytic tinplates and coke tinplates
7212.10.10.00.19 - - - Other
- - Other:
- - - Not further worked than surface-treated
- - - - Containing by weight 0,6 % or more of carbon
7212.10.90.11.11 - - - - - Of a width exceeding 500 mm :
7212.10.90.11.12 - - - - - Of a width not exceeding 500 mm:
- - - - Other
7212.10.90.19.11 - - - - - Of a width exceeding 500 mm :
7212.10.90.19.12 - - - - - Of a width not exceeding 500 mm:
- - - Other:
- - - - Containing by weight 0,6 % or more of carbon
7212.10.90.21.11 - - - - - Of a width exceeding 500 mm :
7212.10.90.21.12 - - - - - Of a width not exceeding 500 mm:
- - - - Other
7212.10.90.29.11 - - - - - Of a width exceeding 500 mm :
7212.10.90.29.12 - - - - - Of a width not exceeding 500 mm:
7212.20 - Electrolytically plated or coated with zinc
- - Not further worked than surface-treated
- - - Containing by weight 0,6 % or more of carbon
7212.20.00.11.11 - - - - Of a width exceeding 500 mm :
7212.20.00.11.12 - - - - Of a width not exceeding 500 mm:
- - - Other
7212.20.00.19.11 - - - - Of a width exceeding 500 mm :
7212.20.00.19.12 - - - - Of a width not exceeding 500 mm:
- - Other:
- - - Containing by weight 0,6 % or more of carbon
7212.20.00.21.11 - - - - Of a width exceeding 500 mm :
7212.20.00.21.12 - - - - Of a width not exceeding 500 mm:
- - - Other
7212.20.00.29.11 - - - - Of a width exceeding 500 mm :
7212.20.00.29.12 - - - - Of a width not exceeding 500 mm:
7212.30 - Otherwise plated or coated with zinc
- - Not further worked than surface-treated
- - - Containing by weight 0,6 % or more of carbon
7212.30.00.11.11 - - - - Of a width exceeding 500 mm :
7212.30.00.11.12 - - - - Of a width not exceeding 500 mm:
- - - Other
7212.30.00.19.11 - - - - Of a width exceeding 500 mm :
7212.30.00.19.12 - - - - Of a width not exceeding 500 mm:
- - Other:
- - - Containing by weight 0,6 % or more of carbon
7212.30.00.21.11 - - - - Of a width exceeding 500 mm :
7212.30.00.21.12 - - - - Of a width not exceeding 500 mm:
- - - Other
7212.30.00.29.11 - - - - Of a width exceeding 500 mm :
7212.30.00.29.12 - - - - Of a width not exceeding 500 mm:
7212.40 - Painted, varnished or coated with plastics:
- - Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
- - - Not further worked than surface-treated
- - - - Containing by weight 0,6 % or more of carbon
7212.40.20.11.11 - - - - - Tinplate, not further worked than varnished
- - - - - Other
7212.40.20.11.21 - - - - - - Of a width exceeding 500 mm :
7212.40.20.11.29 - - - - - - Other
- - - - Other
7212.40.20.19.11 - - - - - Tinplate, not further worked than varnished
- - - - - Other
7212.40.20.19.21 - - - - - - Of a width exceeding 500 mm :
7212.40.20.19.29 - - - - - - Other
- - - Other:
- - - - Containing by weight 0,6 % or more of carbon
7212.40.20.21.11 - - - - - Tinplate
- - - - - Other
7212.40.20.21.21 - - - - - - Of a width exceeding 500 mm :
7212.40.20.21.29 - - - - - - Other
- - - - Other
7212.40.20.29.11 - - - - - Tinplate
- - - - - Other
7212.40.20.29.21 - - - - - - Of a width exceeding 500 mm :
7212.40.20.29.29 - - - - - - Other
- - Other:
- - - Containing by weight 0,6 % or more of carbon
- - - - Of a width exceeding 500 mm :
7212.40.80.10.11 - - - - - Not further worked than surface-treated
7212.40.80.10.19 - - - - - Other
7212.40.80.10.21 - - - - Of a width not exceeding 500 mm:
- - - Other
- - - - Of a width exceeding 500 mm :
7212.40.80.90.11 - - - - - Not further worked than surface-treated
7212.40.80.90.19 - - - - - Other
7212.40.80.90.21 - - - - Of a width not exceeding 500 mm:
7212.50 - Otherwise plated or coated:
- - Plated or coated with chromium oxides or with chromium and chromium oxides
7212.50.20.10.00 - - - Containing by weight 0,6 % or more of carbon
7212.50.20.90.00 - - - Other
- - Plated or coated with chromium or nickel
7212.50.30.10.00 - - - Containing by weight 0,6 % or more of carbon
7212.50.30.90.00 - - - Other
- - Plated or coated with copper
7212.50.40.10.00 - - - Containing by weight 0,6 % or more of carbon
7212.50.40.90.00 - - - Other
- - Plated or coated with aluminium:
- - - Plated or coated with aluminium-zinc alloys
7212.50.61.10.00 - - - - Containing by weight 0,6 % or more of carbon
7212.50.61.90.00 - - - - Other
- - - Other
7212.50.69.10.00 - - - - Containing by weight 0,6 % or more of carbon
7212.50.69.90.00 - - - - Other
- - Other:
- - - Containing by weight 0,6 % or more of carbon
- - - - Not further worked than surface-treated
7212.50.90.10.11 - - - - - Plated or coated with lead
7212.50.90.10.19 - - - - - Other
7212.50.90.10.20 - - - - Other
- - - Other
- - - - Not further worked than surface-treated
7212.50.90.90.11 - - - - - Plated or coated with lead
7212.50.90.90.19 - - - - - Other
7212.50.90.90.20 - - - - Other
7212.60 - Clad
- - Not further worked than surface-treated
- - - Containing by weight 0,6 % or more of carbon
7212.60.00.11.11 - - - - Of a width exceeding 500 mm :
- - - - Of a width not exceeding 500 mm:
7212.60.00.11.21 - - - - - Hot-rolled, not further worked than clad
7212.60.00.11.29 - - - - - Other
- - - Other
7212.60.00.19.11 - - - - Of a width exceeding 500 mm :
- - - - Of a width not exceeding 500 mm:
7212.60.00.19.21 - - - - - Hot-rolled, not further worked than clad
7212.60.00.19.29 - - - - - Other
- - Other:
- - - Containing by weight 0,6 % or more of carbon
7212.60.00.21.11 - - - - Of a width exceeding 500 mm :
7212.60.00.21.12 - - - - Of a width not exceeding 500 mm:
- - - Other
7212.60.00.29.11 - - - - Of a width exceeding 500 mm :
7212.60.00.29.12 - - - - Of a width not exceeding 500 mm:
72.13 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel:
7213.10.00.00.00 - Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.20 - Other, of free-cutting steel
7213.20.00.00.11 - - For producing bolt and nut
7213.20.00.00.12 - - For producing electrodes
7213.20.00.00.13 - - For producing wire and nail
7213.20.00.00.19 - - Other
- Other:
7213.91 - - Of circular cross-section measuring less than 14 mm in diameter:
7213.91.10.00.00 - - - Of a type used for concrete reinforcement
7213.91.20.00.00 - - - Of a type used for tyre cord
- - - Other:
- - - - Containing by weight 0,06 % or less of carbon
7213.91.41.00.11 - - - - - For producing bolt and nut
7213.91.41.00.12 - - - - - For producing electrodes
7213.91.41.00.13 - - - - - For producing wire and nail
7213.91.41.00.19 - - - - - Other
- - - - Containing by weight more than 0,06 % but less than 0,25 % of carbon
7213.91.49.00.11 - - - - - For producing bolt and nut
7213.91.49.00.12 - - - - - For producing electrodes
7213.91.49.00.13 - - - - - For producing wire and nail
7213.91.49.00.19 - - - - - Other
- - - - Containing by weight 0,25 % or more but not more than 0,75 % of carbon
- - - - - Containing by weight more than 0,25 % but less than 0,6 % of carbon
7213.91.70.10.11 - - - - - - For producing bolt and nut
7213.91.70.10.12 - - - - - - For producing electrodes
7213.91.70.10.13 - - - - - - For producing wire and nail
7213.91.70.10.19 - - - - - - Other
7213.91.70.90.00 - - - - - Other
7213.91.90.00.00 - - - - Containing by weight more than 0,75 % of carbon
7213.99 - - Other:
- - - Containing by weight less than 0,25 % of carbon:
7213.99.10.00.11 - - - - For producing bolt and nut
7213.99.10.00.12 - - - - For producing electrodes
7213.99.10.00.13 - - - - For producing wire and nail
7213.99.10.00.19 - - - - Other
- - - Containing by weight 0,25 % or more of carbon
- - - - Containing by weight more than 0,25 % but less than 0,6 % of carbon
7213.99.90.10.11 - - - - - For producing bolt and nut
7213.99.90.10.12 - - - - - For producing electrodes
7213.99.90.10.13 - - - - - For producing wire and nail
7213.99.90.10.19 - - - - - Other
7213.99.90.90.00 - - - - Other
72.14 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
7214.10.00.00.00 - Forged
7214.20 - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.20.00.00.11 - - Cross-sectional dimension of 6-8 mm. (8 inclusive), circular
7214.20.00.00.12 - - Cross-sectional dimension of 8-10 mm. (10 inclusive), circular
7214.20.00.00.13 - - Cross-sectional dimension of 10-26 mm. (26 inclusive), circular
7214.20.00.00.14 - - Cross-sectional dimension of more than 26 mm, circular
7214.20.00.00.15 - - Having four corners
7214.20.00.00.16 - - Having six corners
7214.20.00.00.19 - - Others, cornered
7214.30 - Other, of free-cutting steel
7214.30.00.00.11 - - Cross-sectional dimension of 6-8 mm. (8 inclusive), circular
7214.30.00.00.12 - - Cross-sectional dimension of 8-10 mm. (10 inclusive), circular
7214.30.00.00.13 - - Cross-sectional dimension of 10-26 mm. (26 inclusive), circular
7214.30.00.00.14 - - Cross-sectional dimension of more than 26 mm, circular
7214.30.00.00.15 - - Having four corners
7214.30.00.00.16 - - Having six corners
7214.30.00.00.19 - - Others, cornered
- Other:
7214.91 - - Of rectangular (other than square) cross-section:
7214.91.10.00.00 - - - Containing by weight less than 0,25 % of carbon
7214.91.90.00.00 - - - Containing by weight 0,25 % or more of carbon
7214.99 - - Other:
- - - Containing by weight less than 0,25 % of carbon:
7214.99.10.00.00 - - - - Of a type used for concrete reinforcement
- - - - Other, of circular cross-section measuring in diameter:
7214.99.31.00.00 - - - - - 80 mm or more
- - - - - Less than 80 mm
7214.99.39.00.11 - - - - - - Cross-sectional dimension of 6-8 mm. (8 inclusive), circular
7214.99.39.00.12 - - - - - - Cross-sectional dimension of 8-10 mm. (10 inclusive), circular
7214.99.39.00.13 - - - - - - Cross-sectional dimension of 10-26 mm. (26 inclusive), circular
7214.99.39.00.14 - - - - - - Cross-sectional dimension of more than 26 mm
- - - - Other
7214.99.50.00.11 - - - - - Having four corners
7214.99.50.00.12 - - - - - Having six corners
7214.99.50.00.19 - - - - - Other bars and rods
- - - Containing by weight 0,25 % or more of carbon:
- - - - Of a circular cross-section measuring in diameter:
7214.99.71.00.00 - - - - - 80 mm or more
- - - - - Less than 80 mm
7214.99.79.00.11 - - - - - - Cross-sectional dimension of 6-8 mm. (8 inclusive), circular
7214.99.79.00.12 - - - - - - Cross-sectional dimension of 8-10 mm. (10 inclusive), circular
7214.99.79.00.13 - - - - - - Cross-sectional dimension of 10-26 mm. (26 inclusive), circular
7214.99.79.00.14 - - - - - - Cross-sectional dimension of more than 26 mm, circular
- - - - Other
- - - - - Containing by weight 0,6 % or more of carbon
7214.99.95.10.11 - - - - - - Having four corners
7214.99.95.10.12 - - - - - - Having six corners
7214.99.95.10.19 - - - - - - Other bars and rods
- - - - - Other
7214.99.95.90.11 - - - - - - Having four corners
7214.99.95.90.12 - - - - - - Having six corners
7214.99.95.90.19 - - - - - - Other bars and rods
72.15 Other bars and rods of iron or non-alloy steel:
7215.10 - Of free-cutting steel, not further worked than cold-formed or cold-finished
7215.10.00.00.11 - - Cold-formed, circular
7215.10.00.00.12 - - Cold-formed cornered bars and rods
7215.10.00.00.19 - - Other
7215.50 - Other, not further worked than cold-formed or cold-finished:
- - Containing by weight less than 0,25 % of carbon:
7215.50.11.00.00 - - - Of rectangular (other than square) cross-section
- - - Other
7215.50.19.00.11 - - - - Cold-formed, circular
7215.50.19.00.19 - - - - Other
- - Containing by weight 0,25 % or more of carbon
- - - Containing by weight 0,25% or more but less than 0,6% of carbon
7215.50.80.10.11 - - - - Cold-formed, circular
7215.50.80.10.12 - - - - Cold-formed cornered bars and rods
7215.50.80.10.19 - - - - Other
7215.50.80.20.00 - - - Containing by weight 0,6 % or more of carbon
7215.90 - Other
7215.90.00.00.11 - - Hot-rolled, hot drawn or extruded, not further worked than clad
7215.90.00.00.19 - - Other
72.16 Angles, shapes and sections of iron or non-alloy steel:
7216.10 - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- - - Containing by weight 0,6 % or more of carbon
7216.10.00.10.11 - - - U sections
7216.10.00.10.12 - - - I sections
7216.10.00.10.13 - - - H sections
- - Other
7216.10.00.90.11 - - - U sections
7216.10.00.90.12 - - - I sections
7216.10.00.90.13 - - - H sections
- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21 - - L sections
7216.21.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7216.21.00.90.00 - - - Other
7216.22 - - T sections
7216.22.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7216.22.00.90.00 - - - Other
- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
7216.31 - - U sections:
- - - Of a height of 80 mm or more but not exceeding 220 mm
- - - - With parallel flange faces
7216.31.10.10.11 - - - - - With parallel flange faces
7216.31.10.10.19 - - - - - Other
- - - - Other
7216.31.10.90.11 - - - - - With parallel flange faces
7216.31.10.90.19 - - - - - Other
- - - Of a height exceeding 220 mm
- - - - With parallel flange faces
7216.31.90.10.11 - - - - - With parallel flange faces
7216.31.90.10.19 - - - - - Other
- - - - Other
7216.31.90.90.11 - - - - - With parallel flange faces
7216.31.90.90.19 - - - - - Other
7216.32 - - I sections:
- - - Of a height of 80 mm or more but not exceeding 220 mm:
- - - - With parallel flange faces
7216.32.11.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7216.32.11.90.00 - - - - - Other
- - - - Other:
7216.32.19.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7216.32.19.90.00 - - - - - Other
- - - Of a height exceeding 220 mm:
- - - - With parallel flange faces
7216.32.91.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7216.32.91.90.00 - - - - - Other
- - - - Other:
7216.32.99.10.00 - - - - - Containing by weight 0,6 % or more of carbon
7216.32.99.90.00 - - - - - Other
7216.33 - - H sections:
- - - Of a height of 80 mm or more but not exceeding 180 mm
7216.33.10.10.00 - - - - Containing by weight 0,6 % or more of carbon
7216.33.10.90.00 - - - - Other
- - - Of a height exceeding 180 mm
7216.33.90.10.00 - - - - Containing by weight 0,6 % or more of carbon
7216.33.90.90.00 - - - - Other
7216.40 - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
- - L sections
7216.40.10.10.00 - - - Containing by weight 0,6 % or more of carbon
7216.40.10.90.00 - - - Other
- - T sections
7216.40.90.10.00 - - - Containing by weight 0,6 % or more of carbon
7216.40.90.90.00 - - - Other
7216.50 - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded:
- - With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
7216.50.10.10.00 - - - Containing by weight 0,6 % or more of carbon
7216.50.10.90.00 - - - Other
- - Other:
7216.50.91.00.00 - - - Bulb flats
- - - Other:
- - - - Containing by weight 0,6 % or more of carbon
7216.50.99.10.11 - - - - - Z sections
7216.50.99.10.19 - - - - - Other
- - - - Other
7216.50.99.91.00 - - - - - Z sections
7216.50.99.99.00 - - - - - Other
- Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61 - - Obtained from flat-rolled products:
- - - C, L, U, Z, omega or open-ended sections
7216.61.10.10.00 - - - - Containing by weight 0,6 % or more of carbon
7216.61.10.90.00 - - - - Other
- - - Other:
7216.61.90.10.00 - - - - Containing by weight 0,6 % or more of carbon
7216.61.90.90.00 - - - - Other
7216.69 - - Other
7216.69.00.10.00 - - - Containing by weight 0,6 % or more of carbon
7216.69.00.90.00 - - - Other
- Other:
7216.91 - - Cold-formed or cold-finished from flat-rolled products:
- - - Profiled (ribbed) sheets
7216.91.10.10.00 - - - - Containing by weight 0,6 % or more of carbon
7216.91.10.90.00 - - - - Other
- - - Other:
- - - - Containing by weight 0,6 % or more of carbon
- - - - - Plated or coated with zinc, of a thickness of:
7216.91.80.10.11 - - - - - - Of a thickness less than 2.5 mm
7216.91.80.10.12 - - - - - - Of a thickness of 2.5 mm or more
- - - - - Other
7216.91.80.10.21 - - - - - - Of a thickness less than 2.5 mm
7216.91.80.10.22 - - - - - - Of a thickness of 2.5 mm or more
- - - - Other
- - - - - Plated or coated with zinc, of a thickness of:
7216.91.80.90.11 - - - - - - Of a thickness less than 2.5 mm
7216.91.80.90.12 - - - - - - Of a thickness of 2.5 mm or more
- - - - - Other
7216.91.80.90.21 - - - - - - Of a thickness less than 2.5 mm
7216.91.80.90.22 - - - - - - Of a thickness of 2.5 mm or more
7216.99 - - Other
- - - Containing by weight 0,6 % or more of carbon
7216.99.00.10.11 - - - - Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)
7216.99.00.10.19 - - - - Other
- - - Other
7216.99.00.90.11 - - - - Hot-rolled, hot drawn or extruded, not further worked than clad
7216.99.00.90.19 - - - - Other
72.17 Wire of iron or non-alloy steel:
7217.10 - Not plated or coated, whether or not polished:
- - Containing by weight less than 0,25 % of carbon:
7217.10.10.00.00 - - - With a maximum cross-sectional dimension of less than 0,8 mm
- - - With a maximum cross-sectional dimension of 0,8 mm or more:
- - - - Containing indentations, ribs, grooves or other deformations produced during the rolling process
7217.10.31.00.11 - - - - - With a maximum cross-sectional dimension of 0,8-1,5 mm (including 1,5)
7217.10.31.00.12 - - - - - With a maximum cross-sectional dimension of 1,5-6 mm (including 6)
7217.10.31.00.13 - - - - - With a maximum cross-sectional dimension of more than 6 mm
- - - - Other
7217.10.39.00.11 - - - - - With a maximum cross-sectional dimension of 0,8-1,5 mm (including 1,5)
7217.10.39.00.12 - - - - - With a maximum cross-sectional dimension of 1,5-6 mm (including 6)
7217.10.39.00.13 - - - - - With a maximum cross-sectional dimension of more than 6 mm
- - 0,25 % or more but less than 0,6 % of carbon
7217.10.50.00.11 - - - With a maximum cross-sectional dimension of less than 0,8 mm
7217.10.50.00.12 - - - With a maximum cross-sectional dimension of 0,8-1,5 mm (including 1,5)
7217.10.50.00.13 - - - With a maximum cross-sectional dimension of 1,5-6 mm (including 6)
7217.10.50.00.14 - - - With a maximum cross-sectional dimension of more than 6 mm
7217.10.90.00.00 - - Containing by weight 0,6 % or more of carbon
7217.20 - Plated or coated with zinc:
- - Containing by weight less than 0,25 % of carbon:
7217.20.10.00.00 - - - With a maximum cross-sectional dimension of less than 0,8 mm
- - - With a maximum cross-sectional dimension of 0,8 mm or more
7217.20.30.00.11 - - - - With a maximum cross-sectional dimension of 0,8-1,5 mm (including 1,5)
7217.20.30.00.12 - - - - With a maximum cross-sectional dimension of 1,5-6 mm (including 6)
7217.20.30.00.13 - - - - With a maximum cross-sectional dimension of more than 6 mm
- - 0,25 % or more but less than 0,6 % of carbon
7217.20.50.00.11 - - - With a maximum cross-sectional dimension of less than 0,8 mm
7217.20.50.00.12 - - - With a maximum cross-sectional dimension of 0,8-1,5 mm (including 1,5)
7217.20.50.00.13 - - - With a maximum cross-sectional dimension of 1,5-6 mm (including 6)
7217.20.50.00.14 - - - With a maximum cross-sectional dimension of more than 6 mm
7217.20.90.00.00 - - Containing by weight 0,6 % or more of carbon
7217.30 - Plated or coated with other base metals:
- - Containing by weight less than 0,25 % of carbon:
7217.30.41.00.00 - - - Copper-coated
7217.30.49.00.00 - - - Other
- - 0,25 % or more but less than 0,6 % of carbon
7217.30.50.00.11 - - - Maximum cross-sectional dimension of less than 0,8 mm., copper-coated
7217.30.50.00.12 - - - Maximum cross-sectional dimension of 0,8-1,5 mm. (1,5 inclusive), copper-coated
7217.30.50.00.13 - - - With a maximum cross-sectional dimension of 1,5-6 mm (including 6), Copper-coated
7217.30.50.00.14 - - - With a maximum cross-sectional dimension of more than 6 mm., Copper-coated
7217.30.50.00.15 - - - Maximum cross-sectional dimension of less than 0,8mm , coated with other base metals
7217.30.50.00.16 - - - With a maximum cross-sectional dimension of 0,8-1,5 mm (including 1,5), coated with other base metals
7217.30.50.00.17 - - - With a maximum cross-sectional dimension of 1,5-6 mm (including 6), coated with other base metals
7217.30.50.00.18 - - - With a maximum cross-sectional dimension of more than 6 mm., coated with other base metals
7217.30.90.00.00 - - Containing by weight 0,6 % or more of carbon
7217.90 - Other:
- - Containing by weight less than 0,25 % of carbon:
7217.90.20.00.11 - - - Plastic-coated
7217.90.20.00.19 - - - Other
- - Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217.90.50.00.11 - - - Maximum cross-sectional dimension of less than 0,8 mm., coated with plastics
7217.90.50.00.12 - - - With a maximum cross-sectional dimension of 0,8-1,5 mm (including 1,5), coated with plastics
7217.90.50.00.13 - - - Maximum cross-sectional dimension of 1,5 - 6 mm. (6 inclusive), coated with plastics
7217.90.50.00.14 - - - Maximum cross-sectional dimension of more than 6 mm., coated with plastics
7217.90.50.00.15 - - - Maximum cross-sectional dimension of less than 0,8 mm., coated with other materials
7217.90.50.00.16 - - - With a maximum cross-sectional dimension of 0,8-1,5 mm (including 1,5), coated with other materials
7217.90.50.00.17 - - - Maximum cross-sectional dimension of 1,5-6 mm. (6 inclusive), coated with other materials
7217.90.50.00.18 - - - Maximum cross-sectional dimension of more than 6 mm., coated with other materials
7217.90.90.00.00 - - Containing by weight 0,6 % or more of carbon
III. STAINLESS STEEL
72.18 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
7218.10.00.00.00 - Ingots and other primary forms
- Other:
7218.91 - - Of rectangular (other than square) cross-section:
- - - Containing by weight 2,5 % or more of nickel
7218.91.10.00.11 - - - - Rolled or obtained by continuous casting
7218.91.10.00.12 - - - - Forged
- - - Containing by weight less than 2,5 % of nickel
7218.91.80.00.11 - - - - Rolled or obtained by continuous casting
7218.91.80.00.12 - - - - Forged
7218.99 - - Other:
- - - Of square cross-section:
- - - - Rolled or obtained by continuous casting
7218.99.11.00.11 - - - - - Sheet blocks
7218.99.11.00.12 - - - - - Plate palatinate
7218.99.11.00.19 - - - - - Other
7218.99.19.00.00 - - - - Forged
- - - Other:
7218.99.20.00.00 - - - - Rolled or obtained by continuous casting
- - - - Forged
7218.99.80.00.11 - - - - - Sheet blocks
7218.99.80.00.12 - - - - - Plate palatinate
7218.99.80.00.19 - - - - - Other
72.19 Flat-rolled products of stainless steel, of a width of 600 mm or more:
- Not further worked than hot-rolled, in coils:
7219.11 - - Of a thickness exceeding 10 mm
7219.11.00.00.11 - - - Sheet blanks
7219.11.00.00.19 - - - Other
7219.12 - - Of a thickness of 4,75 mm or more but not exceeding 10 mm:
- - - Containing by weight 2,5 % or more of nickel
7219.12.10.00.11 - - - - Sheet blanks
7219.12.10.00.19 - - - - Other
- - - Containing by weight less than 2,5 % of nickel
7219.12.90.00.11 - - - - Sheet blanks
7219.12.90.00.19 - - - - Other
7219.13 - - Of a thickness of 3 mm or more but less than 4,75 mm:
- - - Containing by weight 2,5 % or more of nickel
7219.13.10.00.11 - - - - Sheet blanks
7219.13.10.00.19 - - - - Other
- - - Containing by weight less than 2,5 % of nickel
7219.13.90.00.11 - - - - Sheet blanks
7219.13.90.00.19 - - - - Other
7219.14 - - Of a thickness of less than 3 mm:
- - - Containing by weight 2,5 % or more of nickel
7219.14.10.00.11 - - - - Sheet blanks
7219.14.10.00.19 - - - - Other
- - - Containing by weight less than 2,5 % of nickel
7219.14.90.00.11 - - - - Sheet blanks
7219.14.90.00.19 - - - - Other
- Not further worked than hot-rolled, not in coils:
7219.21 - - Of a thickness exceeding 10 mm:
- - - Containing by weight 2,5 % or more of nickel
7219.21.10.00.11 - - - - Plates
7219.21.10.00.12 - - - - Wide plates
- - - Containing by weight less than 2,5 % of nickel
7219.21.90.00.11 - - - - Plates
7219.21.90.00.12 - - - - Wide sheets
7219.22 - - Of a thickness of 4,75 mm or more but not exceeding 10 mm:
- - - Containing by weight 2,5 % or more of nickel
7219.22.10.00.11 - - - - Plates
7219.22.10.00.12 - - - - Wide plates
- - - Containing by weight less than 2,5 % of nickel
7219.22.90.00.11 - - - - Plates
7219.22.90.00.12 - - - - Wide plates
7219.23 - - Of a thickness of 3 mm or more but less than 4,75 mm
7219.23.00.00.11 - - - Plates
7219.23.00.00.12 - - - Wide plates
7219.24 - - Of a thickness of less than 3 mm
7219.24.00.00.11 - - - Plates
7219.24.00.00.12 - - - Wide plates
- Not further worked than cold-rolled (cold-reduced):
7219.31.00.00.00 - - Of a thickness of 4,75 mm or more
7219.32 - - Of a thickness of 3 mm or more but less than 4,75 mm:
7219.32.10.00.00 - - - Containing by weight 2,5 % or more of nickel
7219.32.90.00.00 - - - Containing by weight less than 2,5 % of nickel
7219.33 - - Of a thickness exceeding 1 mm but less than 3 mm:
7219.33.10.00.00 - - - Containing by weight 2,5 % or more of nickel
7219.33.90.00.00 - - - Containing by weight less than 2,5 % of nickel
7219.34 - - Of a thickness of 0,5 mm or more but not exceeding 1 mm:
7219.34.10.00.00 - - - Containing by weight 2,5 % or more of nickel
7219.34.90.00.00 - - - Containing by weight less than 2,5 % of nickel
7219.35 - - Of a thickness of less than 0,5 mm:
7219.35.10.00.00 - - - Containing by weight 2,5 % or more of nickel
7219.35.90.00.00 - - - Containing by weight less than 2,5 % of nickel
7219.90 - Other:
7219.90.20.00.00 - - Perforated
7219.90.80.00.00 - - Other
72.20 Flat-rolled products of stainless steel, of a width of less than 600 mm:
- Not further worked than hot-rolled:
7220.11 - - Of a thickness of 4,75 mm or more
7220.11.00.00.11 - - - Sheet blanks
7220.11.00.00.12 - - - Sheets
7220.11.00.00.13 - - - Strips
7220.12 - - Of a thickness of less than 4,75 mm
7220.12.00.00.11 - - - Sheet blanks
7220.12.00.00.12 - - - Sheets
7220.12.00.00.13 - - - Strips
7220.20 - Not further worked than cold-rolled (cold-reduced):
- - Of a thickness of 3 mm or more, containing by weight:
- - - Containing by weight 2,5 % or more of nickel
7220.20.21.00.11 - - - - Of a width exceeding 500 mm :
7220.20.21.00.12 - - - - Of a width not exceeding 500 mm:
- - - Containing by weight less than 2,5 % of nickel
7220.20.29.00.11 - - - - Of a width exceeding 500 mm :
7220.20.29.00.12 - - - - Of a width not exceeding 500 mm:
- - Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight:
- - - Containing by weight 2,5 % or more of nickel
7220.20.41.00.11 - - - - Of a width exceeding 500 mm :
7220.20.41.00.12 - - - - Of a width not exceeding 500 mm:
- - - Containing by weight less than 2,5 % of nickel
7220.20.49.00.11 - - - - Of a width exceeding 500 mm :
7220.20.49.00.12 - - - - Of a width not exceeding 500 mm:
- - Of a thickness not exceeding 0,35 mm, containing by weight:
- - - Containing by weight 2,5 % or more of nickel
7220.20.81.00.11 - - - - Of a width exceeding 500 mm :
7220.20.81.00.12 - - - - Of a width not exceeding 500 mm:
- - - Containing by weight less than 2,5 % of nickel
7220.20.89.00.11 - - - - Of a width exceeding 500 mm :
7220.20.89.00.12 - - - - Of a width not exceeding 500 mm:
7220.90 - Other:
- - Perforated
- - - Of a width exceeding 500 mm:
7220.90.20.00.11 - - - - Not further worked than surface-treated, including cladding
7220.90.20.00.19 - - - - Other
- - - Of a width not exceeding 500 mm:
- - - - Not further worked than surface-treated, including cladding:
7220.90.20.00.21 - - - - - Hot-rolled, not further worked than clad
7220.90.20.00.29 - - - - - Other
7220.90.20.00.39 - - - - Other
- - Other
- - - Of a width exceeding 500 mm:
7220.90.80.00.11 - - - - Not further worked than surface-treated, including cladding
7220.90.80.00.19 - - - - Other
- - - Of a width not exceeding 500 mm:
- - - - Not further worked than surface-treated, including cladding:
7220.90.80.00.21 - - - - - Hot-rolled, not further worked than clad
7220.90.80.00.29 - - - - - Other
7220.90.80.00.39 - - - - Other
7221.00 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel:
7221.00.10.00.00 - Containing by weight 2,5 % or more of nickel
7221.00.90.00.00 - Containing by weight less than 2,5 % of nickel
72.22 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
- Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11 - - Of circular cross-section:
- - - Of a diameter of 80 mm or more, containing by weight:
7222.11.11.00.00 - - - - 2,5 % or more of nickel
7222.11.19.00.00 - - - - Less than 2,5 % of nickel
- - - Of a diameter of less than 80 mm, containing by weight:
7222.11.81.00.00 - - - - 2,5 % or more of nickel
7222.11.89.00.00 - - - - Less than 2,5 % of nickel
7222.19 - - Other:
7222.19.10.00.00 - - - Containing by weight 2,5 % or more of nickel
7222.19.90.00.00 - - - Containing by weight less than 2,5 % of nickel
7222.20 - Bars and rods, not further worked than cold-formed or cold-finished:
- - Of circular cross-section:
- - - Of a diameter of 80 mm or more, containing by weight:
7222.20.11.00.00 - - - - 2,5 % or more of nickel
7222.20.19.00.00 - - - - Less than 2,5 % of nickel
- - - Of a diameter of 25 mm or more, but less than 80 mm, containing by weight:
7222.20.21.00.00 - - - - 2,5 % or more of nickel
7222.20.29.00.00 - - - - Less than 2,5 % of nickel
- - - Of a diameter of less than 25 mm, containing by weight:
7222.20.31.00.00 - - - - 2,5 % or more of nickel
7222.20.39.00.00 - - - - Less than 2,5 % of nickel
- - Other:
7222.20.81.00.00 - - - 2,5 % or more of nickel
7222.20.89.00.00 - - - Less than 2,5 % of nickel
7222.30 - Other bars and rods:
- - Forged
7222.30.51.00.00 - - - 2,5 % or more of nickel
7222.30.91.00.00 - - - Less than 2,5 % of nickel
- - Other
7222.30.97.00.11 - - - Hot-rolled, hot-drawn or extruded, not further worked than clad
7222.30.97.00.19 - - - Other
7222.40 - Angles, shapes and sections:
7222.40.10.00.00 - - Not further worked than hot-rolled, hot-drawn or extruded
7222.40.50.00.00 - - Not further worked than cold-formed or cold-finished
7222.40.90.00.00 - - Other
7223.00 Wire of stainless steel:
- Containing by weight 2,5 % or more of nickel:
7223.00.11.00.00 - - Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
7223.00.19.00.00 - - Other
- Containing by weight less than 2,5 % of nickel
7223.00.91.00.00 - - Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
7223.00.99.00.00 - - Other
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS OF ALLOY OR NON-ALLOY STEEL
72.24 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
- Ingots and other primary forms
7224.10.10.00.00 - - Of tool steel
7224.10.90.00.00 - - Other
7224.90 - Other:
7224.90.02.00.00 - - Of tool steel
- - Other
- - - Of rectangular (including square) cross-section:
- - - - Hot-rolled or obtained by continuous casting:
- - - - - The width measuring less than twice the thickness:
- - - - - - Of high-speed steel
7224.90.03.00.11 - - - - - - - Blooms
7224.90.03.00.12 - - - - - - - Baulks
- - - - - - Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7224.90.05.00.11 - - - - - - - Blooms (square shaped iron ingots, sides of which greater than 12,5cm)
7224.90.05.00.12 - - - - - - - Baulks
- - - - - - Other
7224.90.07.00.11 - - - - - - - Blooms
7224.90.07.00.12 - - - - - - - Baulks
- - - - - Other
7224.90.14.00.11 - - - - - - Blooms
7224.90.14.00.12 - - - - - - Billets
- - - - Forged
7224.90.18.00.11 - - - - - Blooms
7224.90.18.00.12 - - - - - Billets
- - - Other:
- - - - Hot-rolled or obtained by continuous casting:
- - - - - Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7224.90.31.00.11 - - - - - - Sheet blocks
7224.90.31.00.12 - - - - - - Plate palatinate
7224.90.31.00.19 - - - - - - Other
- - - - - Other
7224.90.38.00.11 - - - - - - Sheet blocks
7224.90.38.00.12 - - - - - - Plate palatinate
7224.90.38.00.19 - - - - - - Other
- - - - Forged
- - - - - Of circular or polygonal cross-section
7224.90.90.00.11 - - - - - - Forgery blanks
7224.90.90.00.19 - - - - - - Other
- - - - - Other
7224.90.90.00.21 - - - - - - Sheet blocks
7224.90.90.00.22 - - - - - - Plate palatinate
7224.90.90.00.23 - - - - - - Forgery blanks
7224.90.90.00.29 - - - - - - Other
72.25 Flat-rolled products of other alloy steel, of a width of 600 mm or more:
- Of silicon-electrical steel:
7225.11.00.00.00 - - Grain-oriented
7225.19 - - Other:
- - - Hot-rolled
7225.19.10.00.11 - - - - Having 0,75 or less of watt loss
7225.19.10.00.19 - - - - Other
7225.19.90.00.00 - - - Cold-rolled
7225.30 - Other, not further worked than hot-rolled, in coils:
7225.30.10.00.00 - - Of tool steel
- - Of high-speed steel
7225.30.30.00.11 - - - Not further worked than rolled: not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.30.30.00.19 - - - Other
7225.30.90.00.00 - - Other
7225.40 - Other, not further worked than hot-rolled, not in coils:
7225.40.12.00.00 - - Of tool steel
- - Of high-speed steel
7225.40.15.00.11 - - - Not further worked than rolled: not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.40.15.00.19 - - - Other
- - Other:
7225.40.40.00.00 - - - Of a thickness exceeding 10 mm
7225.40.60.00.00 - - - Of a thickness of 4,75 mm or more but not exceeding 10 mm
7225.40.90.00.00 - - - Of a thickness of less than 4,75 mm
7225.50 - Other, not further worked than cold-rolled (cold-reduced):
- - Of high-speed steel
- - - Of a thickness of 3 mm or more:
7225.50.20.00.21 - - - - Not further worked than rolled: not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.50.20.00.29 - - - - Other
- - - Of a thickness of less than 3 mm:
7225.50.20.00.31 - - - - Not further worked than rolled: not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.50.20.00.39 - - - - Other
- - Other:
7225.50.80.00.11 - - - Of a thickness of 3 mm or more
7225.50.80.00.12 - - - Of a thickness of less than 3 mm
- Other:
7225.91 - - Electrolytically plated or coated with zinc
7225.91.00.00.10 - - - Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.91.00.00.90 - - - Other
7225.92 - - Otherwise plated or coated with zinc
7225.92.00.00.10 - - - Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.92.00.00.90 - - - Other
7225.99 - - Other
7225.99.00.00.10 - - - Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.99.00.00.90 - - - Other
72.26 Flat-rolled products of other alloy steel, of a width of less than 600 mm:
- Of silicon-electrical steel:
7226.11 - - Grain-oriented
7226.11.00.00.10 - - - Of a width exceeding 500 mm :
7226.11.00.00.90 - - - Of a width not exceeding 500 mm:
7226.19 - - Other:
- - - Not further worked than hot-rolled
7226.19.10.00.11 - - - - Having 0,75 or less of watt loss
7226.19.10.00.19 - - - - Other
- - - Other:
7226.19.80.00.11 - - - - Of a width exceeding 500 mm :
7226.19.80.00.12 - - - - Of a width not exceeding 500 mm:
7226.20 - Of high-speed steel
- - Not further worked than hot-rolled; of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than cold-rolled (cold-reduced) or not further worked than surface-treated, including cladding
7226.20.00.00.11 - - - Not further worked than hot-rolled
7226.20.00.00.12 - - - Of a width not exceeding 500 mm hot-rolled not further worked than clad
7226.20.00.00.13 - - - Of a width exceeding 500 mm not further worked than cold-rolled (cold-reduced) or not further worked than surface-treated, including cladding
7226.20.00.00.21 - - Other
- Other:
7226.91 - - Not further worked than hot-rolled:
7226.91.20.00.00 - - - Of tool steel
- - - Other:
7226.91.91.00.00 - - - - Of a thickness of 4,75 mm or more
7226.91.99.00.00 - - - - Of a thickness of less than 4,75 mm
7226.92 - - Not further worked than cold-rolled (cold-reduced)
7226.92.00.00.11 - - - Of a width exceeding 500 mm
7226.92.00.00.12 - - - Of a width not exceeding 500 mm:
7226.99 - - Other:
7226.99.10.00.00 - - - Electrolytically plated or coated with zinc
7226.99.30.00.00 - - - Otherwise plated or coated with zinc
7226.99.70.00.00 - - - Other
72.27 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
7227.10.00.00.00 - Of high-speed steel
7227.20.00.00.00 - Of silico-manganese steel
7227.90 - Other:
7227.90.10.00.00 - - Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7227.90.50.00.00 - - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7227.90.95.00.00 - - Other
72.28 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel:
7228.10 - Bars and rods, of high-speed steel:
7228.10.20.00.00 - - Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228.10.50.00.00 - - Forged
7228.10.90.00.00 - - Other
7228.20 - Bars and rods, of silico-manganese steel:
7228.20.10.00.00 - - Of rectangular (other than square) cross-section, hot-rolled on four faces
- - Other:
7228.20.91.00.00 - - - Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228.20.99.00.00 - - - Other
7228.30 - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7228.30.20.00.00 - - Of tool steel
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum:
7228.30.41.00.00 - - - Of circular cross-section of a diameter of 80 mm or more
7228.30.49.00.00 - - - Other
- - Other:
- - - Of circular cross-section:
7228.30.61.00.00 - - - - 80 mm or more
7228.30.69.00.00 - - - - Less than 80 mm
7228.30.70.00.00 - - - Of rectangular (other than square) cross-section, hot-rolled on four faces
7228.30.89.00.00 - - - Other
7228.40 - Other bars and rods, not further worked than forged:
7228.40.10.00.00 - - Of tool steel
7228.40.90.00.00 - - Other
7228.50 - Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.20.00.00 - - Of tool steel
7228.50.40.00.00 - - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- - Other:
- - - Of circular cross-section:
7228.50.61.00.00 - - - - 80 mm or more
7228.50.69.00.00 - - - - Less than 80 mm
7228.50.80.00.00 - - - Other
7228.60 - Other bars and rods:
7228.60.20.00.00 - - Of tool steel
7228.60.80.00.00 - - Other
7228.70 - Angles, shapes and sections:
7228.70.10.00.00 - - Not further worked than hot-rolled, hot-drawn or extruded
7228.70.90.00.00 - - Other
7228.80 - Hollow drill bars and rods
7228.80.00.00.10 - - Of alloy steel
7228.80.00.00.90 - - Of non-alloy steel
72.29 Wire of other alloy steel:
7229.20 - Of silico-manganese steel
7229.20.00.00.11 - - Uncoated wires
7229.20.00.00.12 - - Coated wires
7229.90 - Other:
7229.90.20.00.00 - - Of high-speed steel
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7229.90.50.00.11 - - - Uncoated wires
7229.90.50.00.12 - - - Coated wires
- - Other
7229.90.90.00.11 - - - Uncoated wires
7229.90.90.00.12 - - - Coated wires